2023 Yanmar SA-425 Subcompact Tractor

Available Attachments for the Yanar 425 —

• Front End Loader
• Front Blade,
• 3 Pt. Attachments,
• Backhoe,
• Snow Blower,
• Mid-Mount Mower

Engine —

• Type: 4 Cycle Inline, Water Cooled Diesel
• Number of Cylinders: 3
• Bore & Stroke in (mm): 3.15×3.30 (80×84)
• Total Displacement cu in (L): 77.2 (1.266)
• Gross Power: EPA Regulation HP (kW): 23.9 (17.8)
• Net Power HP (kW): 21.7 (16.2)
• Rated Revolution RPM: 3,200
• Maximum Torque ft.lbs (Nm): 45.7 (62.0)
• Battery: 540 CCA
• Fuel: Diesel

Capacities —

• Fuel Tank US gal (L): 6.1 (23.0)
• Engine Oil US qt (L): 3.6 (3.4)
• Engine Coolant US qt (L): 3.0 (2.8)
• Transmission Oil US gal (L): 4.1 (15.5)
• Front Axle Oil US qt (L): 3.7 (3.5)

Dimensions in. (mm) —

• Overall Length (with 3-Point Hitch): 105.8 (2,688)
• Overall Width (with R4 Tires): 54.1 (1,373)
• Overall Height (with Roll-Over Protection (ROPS) and R4 Tires): 87.2 (2,215)
• Overall Height (with Folded ROPS, R4 Tires, Top of Steering Wheel): 71.8 (1,824)
• Overall Height (with R4 Tires, Top of Steering Wheel): 56.7 (1,440)
• Wheel Base: 63.0 (1,600)
• Minimum Ground Clearance (with R4 Tires): 9.9 (249)
• Tread (with R4): Front – 37.8 (960), & Rear – 40.5 (1,029)

Weight lb. (kg) —

• (with ROPS, R4 Tires): 1,830 (830)

Traveling System —

• Tires —
  • Turf (R3): Front – 23×8.50-12 4PR, & Rear – 36×14.00-15 4PR
  • Industrial (R4): Front – 23×8.50-12 4PR, & Rear – 14-17.5 6PR
• Steering: Hydrostatic Power
• Transmission: Hydrostatic Transmission, Dual Range Speeds
• Drive: Selected 4WD
• Brake: Wet Disk
• Minimum Turning Radius ft. (m): 8.5 (2.6)

Hydraulic Unit —

• Hydraulic Control System: Position Control, Open Center
• Pump Capacity (implement) US gal/min. (L/min): 4.3 (16.1)
• Pump Capacity (steering) US gal/min. (L/min): 3.7 (14.1)
• 3-Point Hitch: Limited Category 1
• Maximum Lift Force 24 in Behind Lift Point lb. (kg): 1,209 (548)
• System Pressure psi (Mpa): 2,429 (16.7)

Power Take Off (PTO) —

• Power HP (kW): 18.1 (13.5)
• Type: Hydraulic Clutch
• Rear —
  • Shaft Size: 35 mm OD, 6 Splines
  • Type: Independent
  • Speed/Engine RPM: 554/3,200
• Mid —
  • Shaft Size: SAE16/32, 15 Splines
  • Type: Independent
  • Speed/Engine RPM: 2,057/3,200

573.885.6300

Get A Quote